benchtop drill press base

Cummins Industrial Tools 5 Speed – Bench Top Drill Press

The Cummins 5 Speed is important thave in every workshop. This has 5 speed that is quick-change. The tool features a quill that is long mortising. Its drilling depth is adjustable, stopping the quill positively. Cummins bench top drill presses have an adjustable dining table that tilts left and right, for the angled drilling operation.

Technical Details:

½ in. drill chuck

Press height: 22 ½ inches

Quill travel – 50 millimeter

Solid 11 in. x 7 in. base

1/2 Horsepower

Energy: 60 Hz ,120 V, 2.4 amperes

Dining table size 6 3/8 in. x 6 3/8 in.

Nload speed 760-3070 rpm

3 prong plug

UL listed

Other known brands of drill presses include the immediate following:


Fisch Precision Tools




Grizzly, etc

Showcased above the top-selling contemporary drilling tools. Consider the versatiliy for the device you are looking tbuy.To be aware of drill press bearings and drill press bits for wood, kindly visit the internet site benchtop drill press with laser.

Floor-standing pillar drills tend thave more energy compared to bench-top models, with more accessories and accessories on offer, and smake ideal tools for the DIY or workshop that is commercial a challenging selection of drilling needs. The bench-top models are good all-round machines for the home enthusiast and come at a lowered price.

There are several features that are important create a pillar drill svery versatile and ideal for the home. The foremost is the true quantity of rate settings. The bit requires trotate at different speeds tdrill through different materials, and also the diameter regarding the hole alsrequires settings that are different. The range that is typical of has models with between five and 16 rate settings, however some even have as much as 19 different settings.

Level stops allow you tdrill part-way via a work piece, due to the fact bit will simply be allowed tdrop ta point that is certain. They are great in the event that you need tdrill a large numbers of identical holes too.

The spindle-to-column distance could be the maximum distance through the side of the ongoing work piece that you can drill a hole. If you are new tthis, the spindle could be the destination in which the drill bit is, plus the column is the dense circular vertical area of the stand that supports the entire device. Be aware that if you’d like tdrill a hole, say, 150mm from the edge of a piece of work, you need a drill with a spindle-to-column distance of 150mm but this would be referred to as a “300mm” drill.

The absolute most essential accessory for a pillar drill within the fence, a straight border that holds work with destination and is good for making several similar holes. You can alsget such things as sanding drums, just one more use with this tool that is great.

Leave a Reply

Your email address will not be published. Required fields are marked *